Izdelki za cevi za (571)

Reduction

It is used in places where the external pressure is not too high, where there is mechanical stress, in buildings, residences, prefabricated structures, in all applications on plaster and surface, in concrete, in plasterboard, in walls or suspended ceilings, in all structures where halogen, acid gas formation is not desired. It prevents the spread of flame and the resulting gas does not adversely affect human health. Resistant to breakage, crushing and impact Compression Resistance:320N Impact Resistance:2 kg. Min. Operation Temp.:-15 C Max. Operation Temp:+60 C

The maximum temperature strength of standard type pre-insulated pipes is 140 °C. For this reason, rock wool reinforced (industrial type) pre-insulated seamless steel pipes must be used in lines that are required to operate at higher temperatures such as hot water, hot oil and steam lines. EN 10216-2 :P235GH-TC1 / P265GH-TC2 ASTM A106:GRADE A- GRADE B- GRADE C Rock Wool Type:Blanket Type- Prefabricated Pipe Type Density:80-125 kg/m³ in accordance with the standard EN 1602-100 kg/m³ in accordance with the EN 1602 Thermal conductivity:λ≤0,040/mK in accordance with the standard EN 12667/12939 Steam Diffusion Resistance Factor:µ=1 in accordance with the standard EN 13162 Operating Temperature:-50 / +250ºC Melting point:>1000°C in accordance with the standard DIN 4102 Thickness:30-120 mm Aluminium Foil:Coated

PLASTIC October PLUMBING FITTINGS October PLUMBING PIPES ELBOWS ADDITIONAL MUF CROCHET LENGTH PIPE

Color 126 - Ribbed Piping Product code:126

It is the quality with the best malleability feature among the austenitics. Its malleability capability is around 78% and it is named as the automat of stainless steel. Although the sulfur (S) addition improves its malleability, it also reduces corrosion resistance (lower than 304) and weakens its formability, it is especially not suitable for straight bending. Despite sulfur, its toughness degree is the same as 304.

Specializing in jacketed pipe systems for oil and chocolate plants, Baztaş ensures temperature-controlled transport systems that enhance efficiency and product quality

We produce the necessary forming machines for materials such as wire, pipe, rod, bar, plate, coil sheet, which are shaped in the industry.

ALS-3012 40 mm pipe rosette

95mm Mono Black Hand Shower code:HD008

The temperature cycling tester is designed to determine the resistance of thermoplastic pipe network and connections consisting of stiff or flexible parts to alternating thermal shock. This applies to pipe systems intended to be used for conveying hot and cold pressurized water. According to EN12293, ISO10508, sample carbon, 3 pressure lines, hot and cold water tank, chiller, computer controlled, report in WORD No. of test samples :3 Pressure range :up to 18 bars Test cabon :Included Chiller :Option Control type:by computer Data port :USB Hot and cold water tank :included Software:included

Curtain Pipe, Winter Garden Profile, Rail Pergola OZL-90 Ref:OZL-90

Introducing the K3700 Pipe Tong from KEDY, a reliable manual pipe handling equipment that is designed to make your job easier. This tong can handle pipes with a maximum weight of 5 tons and a maximum diameter of 700mm. It has adjustable jaws that can accommodate a wide range of pipe sizes, making it suitable for various applications in many industries. The K3700 is operated manually, which allows for easy and precise adjustments to the jaws, ensuring a secure grip on the pipe. The tongs have a ratcheting mechanism to make adjustments and a swivel hook to attach to a crane or other lifting device. The K3700 also has safety features such as a locking mechanism to keep jaws securely closed, and a handle to protect the operator's hands while in use. Made of steel, the K3700 is built to withstand heavy-duty use and handle heavy loads. It is lightweight and easy to use, making it an ideal choice for any manual pipe handling job. Contact us today to learn more or to place an order! Capacity:5 t Weight:200 kg Power Source:Manual or Electric Safety feature:Locking mechanism Material:S355j2 or custom high tensile steel Certification :CE Warranty:2 years

Micro Irrigation Equipments - Sprinklers - Stakes - PVC Pipes - Fittings are available

For free hanging of horizontal pipes. In spring systems, hanging height in connecting pipes of sprinkler systems and in fire extinguishing systems for fire protection stations can be adjusted to the desired extent with the rots. It is coated with 8-10 micron zinc against corrosion.

His Teknik Ltd. Sti. is gave to conical and decorative shape to steel, stainless steel and aluminum pipes using the radial forging technology.   The products in question are usually used for decorative purposes or park - garden - street lighting poles, decorative and conical flag poles, decorative balustrades, removable bollards fences and totem poles. Our company is offered to our solutions partners that different material options with special designs.

Galvanized (Hot Dip) Part No:LG-4D.14.G3 Diameter (INCH):2 " POLE Product Dimension (mm):167*125*390 Weight (KG):2,71 kg

Pipe supports are essential components of piping systems. Choosing the right support type is essential for a cost effective and well performing piping system. Novelty Steel fabricates; * Pipe Racks * Structural Supports * Pipe Shoes * Anchors * Rods * Rollers

Tork Değeri: 60...80 Nm Elektrikli Beslenme: 85 - 265VAC (Oransal için), 230 VAC, 24 VDC Giriş Kontrol Sinyali: 4 - 20 mA, 2 - 10 VDC, 1 - 5 DC, 0 - 5 VDC Geri Bildirim Sinyali: 4 - 20 mA, 2 - 10 VDC, 1 - 5 VDC Terslenebilir Sinyal: Giriş ve çıkış için mevcut Otomatik Kalibrasyon: Kontrol kartı üzerinden butonlar yardımıyla yapılabilir. Hata Pozisyonları: Mevcut pozisyonda kal, vanayı aç, vanayı kapat Koruma: Yüksek akım koruması, gerilim koruması, güç koruması, sıcaklık koruması, ani ters çalısma koruması Aşırı Tork Anahtarı: Yok Motor: 24 VDC Fırçalı motor, 230 VAC motor Limit Switchler: 2x Açma/Kapama SPDT, Max 250 VAC 5A Ek Limit Switchler: 2x Açma/Kapama SPDT, Max 250 VAC 5A Koruma Sınıfı: IP67, IP68 Gövde Malzemesi: Alüminyum enjeksiyon Manuel Kontrol: El çarkı ile (otomatik kavramadan çıkma özelliği) veya elektronik kart üzerinden İç Isıtıcı: 5 W Kablo Rakor Ölçüsü: M20x1,5

yuvarlak ve yassı damla sulama sistemleri bağlantı parçaları üretimi

Robust and Rigid Body Twin Station with Clamping Devices 4 Axis Translation Stages Laser Welding Head Laser Safe Class 1 Enclosure Customized HMI

Çiftçinin ihtiyacına göre uzun ARGE çalışmaları sonucu tasarlanmış olduğumuz sehpalı yağmurlama hat vanasının bir çok avantajı bulunmaktadır; ✓ Şık ve estetik bir tasarıma sahiptir, ✓ Diğer hat vanalarına göre hafiftir, ✓ Takıp sökülebilen sehpası ile devrilmeyi önler, ✓ 16 Bar basınca dayanıklıdır, ✓ İçerdiği farklı malzeme karışı ile yüksek mukavemete sahiptir, kırılmayı önler ✓ Conta kanalı otomatik sistemdir, sızdırmayı önler ✓ Mandalları metal üzeri alüminyum kaplamadır, paslanmama garantisi vardır.

8 KOLLU 90 CM YÜKSEKLİĞİNDE ÇUBUK ŞAMDAN

Aluminum anodized color options are standard for plexiglass Balustrade and plexiglass strut-railing models, alternative colors can be produced on special orders, more 4 different coating colors optiontional All Dulda Plexiglass Railing models are guaranteed for 5 years. Plexiglass products are manufactured using first class Japanese Sumipex raw material. Each of our Plexiglass Newel models has a special design and is registered and patented in the name of Dulda. Product diameters 38 mm to 120 mm. product length (height) is 120 cm as standard. Dulda plexiglass Newel models have high corrosion resistance against UV rays and alcohol-solvent based chemicals.

Sedir Automotive can supply following product ; "Metric & UNF" Hose Adapters Ball-and-socket Joint Elbow Blind Plugs Brake Bleeding Nozzle Brake Hose Adapters Conical Nuts (Brass) Double Ended Hose Connectors Female × Female, Hexagon Coupling 316 Precision Instrumentation Pipe Fittings Fuel Pipe Connectors Flared Hose Adapters Flare Nuts Flanged and Exhaust Nuts Fuel Pipe Connectors and Elbows Gradual Ferrule (Brass) Hose Ferrules (Brass) Hose Ferrules (Metal) Internal Flared Hose Adapters Hydraulic Tube, Weld Union, Connector Hose Tee Connectors (Hosetail) Hose Fitting Caps (Brass) Male x Female Extended Hydraulic Adapter Metal Reduction Pipe Adapters R" - NPT" Hose Adapter Tipper Coupling Female Socket Sheet Iron Sleeves

300x300/8 SQUARE MEGA TELESCOPIC UMBRELLA 400x400/8 SQUARE MEGA TELESCOPIC UMBRELLA 500x500/8 SQUARE MEGA TELESCOPIC UMBRELLA 300x400/8 RECTANGULAR MEGA TELESCOPIC UMBRELLA 300x300/8 MANUEL SQUARE MEGA TELESCOPIC UMBRELLA 400x400/8 MANUEL SQUARE MEGA TELESCOPIC UMBRELLA 500x500/8 MANUEL SQUARE MEGA TELESCOPIC UMBRELLA BASE with 4 MARBLE and WHEELS - 200 kg for 3 m and 4m BASE with 8 MARBLE NO WHEELS - 360 kg for 5 m and 6m GRAND BASE 4 pcs LIGHT with REMOTE CONTROL 2 pcs 2000 W HEATERS

Wir können Ihnen bei jeder Art von Gewinde helfen: UN / UNF-Gewinde NPT / NPTF-Gewinde BSPP (BSP, parallel) Gewinde BSPT (BSP, konisch) Gewinde Metrisches paralleles Gewinde Metrisches konisches Gewinde

HDPE END CAP INJECTION MOULDED PE100 SDR11 PN16 SDR17 PN10

Maximum bending capacity: 42 x 2 mm Maximum mold diameter: 250 mm Minimum mold diameter: 50 mm Direct product drawing transfer with step file Servo bending , feeding , rotation and dimensioning 3D simulation Easy to use by simple interface Able to use 3 molds simultaneously Push bending feature Maximum bending angle is 190° Able to see errors on the screen Security warning system Limitless product saving to memory Tube bending handling length: (4000 mm) Windows 10 Multiple language option 1 year warranty Complies with CE norms

For hanging low voltage cable. PHP 25 : Pipe Hanger Pin 25 PHP 32 : Pipe Hanger Pin 32 PHP 46 : Pipe Hanger Pin 46